Piyush S Desai

Piyush S Desai

Associate Professor

Arts Science and Commerce College, Kholwad, Kamrej Char Rasta 394185. Surat, Gujarat, India.

Profile ID RP-000-7724 Joined 2023-06-24 22 articles
0Connections
7
Total Views
22
Total Publications
294
Publication Views

Articles(22)

Authors: P.S. Desai, Bhumika Parmar, F.P. Desai, Adarsh Patel

DOI: 10.1016/j.rsurfi.2023.100176

Volume14
Issue0
Pages100176
Abstract

The inhibition effectiveness of diverse concentrations of Datura Fruit Extract (DFE) on the corrosion of zinc in 0.05–0.1 M HCl solutions was examined by weight loss (WL), Electrochemical Impedance Spectroscopy (EIS), potentiodynamic polarization (PDP), and surface analysis techniques. The mass loss method's results demonstrated that raising the DFE concentration improved the efficiency of the inhibition. The maximum inhibition efficiency was 99.40% at 2.0 g/L of DFE. In the temperature ranging from 303 to 333 K, the effect of temperature on the corrosion behavior while adding DFE was also investigated. A DFE extract had been adsorbed on the surface of the metal by Langmuir adsorption isotherm models. It was established that the DFE's activation parameters and negative Gibb's free energy show that rates of adsorption have been spontaneous. According to polarization analysis, DFE regulates both the cathodic and the anodic response. Images obtained using a SEM (Scanning Electron Microscope) reveal that the DFE reduces surface damage. The adsorption inhibition mechanism is supported by the AFM analysis findings. FT-IR (Fourier transform infrared) spectroscopy has been utilized to ascertain the functional group of the DFE. All of the applicable approaches'

Authors: P.S. Desai, Falguni Desai, Adarsh Patel, Bhumika Parmar

DOI: 10.1016/j.apsadv.2023.100414

Volume16
Issue0
Pages100414
Abstract

The study is on the application of Eucalyptus leaves extract (ELE) as anticorrosive properties for aluminium alloy in 0.5 M HCl by using potentiodynamic polarization (PDP), gravimetric weight loss, and Electrochemical impedance spectroscopic (EIS) methods. The corrosion inhibition characteristics of ELE on aluminium in HCl solution have been examined. This investigation showed the finest inhibition efficiencies of 95.0%, 92.0% and 89.3% that were obtained from weight loss, PDP and EIS at concentration of 0.5% ELE at 303 K respectively. As per Langmuir adsorption isotherm models, an extract of Eucalyptus leaves was adsorbed on the metal surface. The effect of the temperature on the corrosion behaviour with adding of the best concentration of ELE was studied in the temperature range 313–333 K. It was found that inhibition efficiency is independent of temperature. The negative Gibb's free energy and activation parameters of the ELE were recorded and the results indicated that the adsorption rates were spontaneous. The results obtained from PDP and EIS shows that the corrosion inhibition procedure is charge transfer controlled, and the ELE works as a mixed-type inhibitor. The findings of SEM (Scanning electron microscopy) and AFM (Atomic force microscopy) studies support the adsorption inhibition mechanism. The results of all the experiments conduct are consistent. The functional groups of the ELE were identified using Fourier transform infrared (FTIR) spectroscopy.

Authors: P.S. Desai, R.T. Vashi

DOI: 10.1108/acmm-09-2024-3100

Volume72
Issue1
Pages107-120
Abstract

Purpose The aim of this study is to evaluate the corrosion inhibitory properties of three piperazine derivatives – Ethyl 5-(piperazine-1-yl) benzofuran-2-carboxylate (EPBC), 5-[4–(1-tert-butoxyethenyl) piperazin-1-yl]-1-benzofuran-2-carboxamide (BBPC) and Tert-butyl-4–(2-(ethoxycarbonyl)benzofuran-5-yl)-piperazine-1-carboxylate (TBPC) – on Al surfaces in the presence of hydrochloric acid (HCl). The research uses density functional theory (DFT) and molecular dynamics simulations to explore the effectiveness of these derivatives as corrosion inhibitors and to understand their adsorption behavior at the molecular level. Design/methodology/approach This study uses a computational approach using DFT at various levels (B3LYP/6–31+G(d,p), B3LYP/6–311+G(d,p), WB97XD/DGDZVP) to calculate essential quantum chemical parameters such as energy gap (ΔE), ionization energy (I), absolute electronegativity (χ), electron affinity (E), dipole moment (µ), absolute softness (s), fraction of electron transferred (ΔN) and absolute hardness (η). The Fukui function and local softness indices are used to assess the sites for electrophilic and nucleophilic attacks on the inhibitors. Molecular dynamics simulations are performed to analyze the adsorption behavior of these derivatives on the Al (110) surface using the adsorption locator method. Theoretical methods like DFT provide quantum chemical parameters, explaining inhibitor reactivity, whereas molecular dynamics simulate adsorption behavior on Al (110), both supporting and correlating with experimental inhibition efficiency trends. Findings This study demonstrates that all three piperazine derivatives exhibit strong adsorption on the Al surface, with high adsorption energies, good solubility and low toxicity, making them effective corrosion inhibitors in acidic environments. Among the three, TBPC showed superior inhibitory performance, particularly in the presence of HCl, due to its optimal electronic properties and stable adsorption on the Al (1 1 0) surface. Originality/value This research contributes to the field by combining DFT calculations and molecular dynamic simulations to evaluate the corrosion inhibition potential of piperazine derivatives comprehensively. This work advances the understanding of the adsorption mechanisms of organic inhibitors on metal surfaces and offers a detailed quantum chemical and adsorption behavior analysis.

Authors: Falguni Piyush Desai, Piyush Sumantrai Desai, Nayna Kalpesh Desai, Riaz Abbasali Tai

DOI: 10.24857/rgsa.v18n3-094

Volume18
Issue3
Pagese04825
Abstract

Objective: The present study focuses on the interconnectivity of all life as reflected in Vedic literature. The affirmation of ecosystem, natural balance and bio-network transpires somewhat very naturally in ancient Indian Classical literature the Vedas. It chants the sacredness of the ecological designs and the natural coordination of human beings and the ecosystem.   Method: Literature review and the analysis of the Vedic Mantras relating to the contemporary present-day contexts.   Results and Discussion: The study discusses and reveals the pieces of evidence of ecological poetry of peace between human beings and their natural surroundings in Vedic literature. Human understanding of nature as sacred builds an individual’s attitude on how one perceives and preserves the nature around an ecosystem. Human bonding and decoding of the semiotics of nature need to be holistic and non-discriminatory. This is an attempt to rejuvenate the degree of blessedness which we attribute to ecology, devoted to our overall moral and ethical being. The paper inclines towards a study that endeavours vital enquiry into the possible borders of human inventiveness and receptiveness. This is an exploration of the use of poetic spontaneity by the human race to figure out human bonding to the ecology and the earth. It illustrates that Vedic eco-poetry marvellous sequencing that admires the search for esthetic exquisiteness, methodical pragmatism and connotation in human interactions with nature.   Conclusion: The study presents connectivity in Vedic Eco poetry drawing it to contemporary concepts of Sustainability and concluding with education for sustainable development.   Originality and Value: Vedic narratives are the ethno-eco-poetry of nature and human nature. It reflects this co-existence as a celebration of life. It reveals harmony and natural interconnectivity as well as the interdependence of all living entities and nature.

Authors: Falguni P. Desai, Piyush S. Desai, Fatma Sonmez Cakir, Bhavna T. Naik, Riaz A. Tai

DOI: 10.3934/steme.2024007

Volume4
Issue2
Pages106-126
Abstract

<abstract> <p>We described an exploration of the impact of India's state Gujarat Government's Employability enhancement drive, 'Finishing School' (FS) training on the graduate level tribal college students in Gujarat, India. A literature review on employment skills (ES), vision, mission, and ES set module of FS was used to formulate the tool–Employability Enhancement Measuring Scale (EEMS). Data generation methods include pre and post-tests by EEMS survey questionnaire. SPSS 24 statistical package program was used for data analysis. The values before and after the training were compared using the Paired and Independent samples t-test and descriptive statistics. Results indicated a significant positive effect on tribal students' employability skills. The tool traced what students became by improving upon the ES sets by the end of the 'FS' training. The study's significance lies in the focus on tribal groups, aligning with the state's long-term vision for holistic growth. With a majority of students from the underprivileged Dang Forest area, the research suggested that FS training promoted inclusive growth, contributing to New India @ 75, and supporting Sustainable Development Goals (SDGs) 4, 8, 10, and 16. It could be inferred that the experimental group in this study constituted 93% tribal students, many of whom were first-generation learners, making the Gujarat experiment a valuable model for potential adoption in diverse regions globally.</p> </abstract>

Authors: Piyush S. Desai, Falguni P. Desai

DOI: 10.3934/environsci.2023003

Volume10
Issue1
Pages33-62
Abstract

<abstract> <p>Metal corrosion is a significant and growing area of study in industrial problems, which has found productive research ground in the field of green chemistry. In the last 10 years, green chemistry has been highlighting the importance of safeguarding human as well as the environmental well-being, in an economically advantageous way aiming at keeping away from reducing waste hazardous toxins, and pollutants. The era of metal degradation, commonly faced due to the usage of hazardous chemicals became very relevant and useful in the research area of chemistry. Even though several experiments have been conducted and, several research articles were published on this topic of nature-friendly green and clean inhibitors still there are yet a lot of things to be explored in this field for sustainable eco-friendly existence of human and natural interconnected existence. The main aim of the study is to provide a summary and describe the past authentic research that accounted in the research literature to employ eco-friendly corrosion inhibitors, especially extraction from leaves, stems, seeds, and fruits of the plants for aluminum alloy in acid solutions in the past decade. Weight loss and electrochemical approaches are among the most often utilized methods to measure corrosion rate and to evaluate the effectiveness of green corrosion inhibitors. The relevance of the area prompted the further study, leading to a large number of substances being evaluated.</p> </abstract>

Authors: Keyur M. Pandya, Janki J. Patel, Arpan H. Patel, Navin B. Patel, Piyush. S. Desai

DOI: 10.2174/1570178617999200819164729

Volume18
Issue7
Pages574-582
Abstract

A series of substituted imidazole-pyrazole fused compounds were designed & fused synthesized by employing Debus-Radziszewski one-pot synthesis reaction. Azoles are an extensive and comparatively new class of synthetic compounds including imidazoles and pyrazoles. The current clinical treatment uses compounds of azole framework. Azoles act by inhibiting ergosterol synthesis pathway (a principal component of the fungal cell wall). In addition, a literature review shows that the compounds that include imidazoles and pyrazoles have significant anti-bacterial and anti-mycobacterial effects. In light of the above findings, a series of compounds with imidazole and pyrazole scaffolds were sketched and developed to examine anti-bacterial, antifungal and antimycobacterial activities. The structures of the synthesized compounds were characterized using <sup>1</sup>HNMR, <sup>13</sup>CNMR, elemental analysis, and MS spectral data. The target compounds were screened for their in-vitro antimicrobial activity against gram-positive and gram-negative bacterial species by disc diffusion method according to the NCCLS (National Committee for Clinical Laboratory Standards) and anti-mycobacterial activity against the Mycobacterium tuberculosis H37Rv strain. The results revealed that imidazole-pyrazole fused scaffold compounds have potential antibacterial, antifungal and anti-mycobacterial activities which can be further optimized to get a lead compound.

Authors: P.S. DESAI, D.V. PAREKH

DOI: 10.14233/ajchem.2021.23073

Volume33
Issue4
Pages747-751
Abstract

In this work, 5-bromoanthranilic acid was condensed with 1-(5-benzoyl-1H-1,2,3-benzotriazole-1-yl)-2-chloro-ethanone to form 2-{[2- (5-benzoyl-1H-benzotriazol-1-yl)-2-oxoethyl]amino}-5-bromobenzoic acid. The newly synthesized ligand and its metal(II) complexes with first transition metal series (Cu(II), Ni(II), Co(II), Zn(II) and Mn(II)) have been synthesized and characterized by using elemental analysis, infrared and electronic spectra. The IR spectra, NMR spectra and atomic absorption analysis show that the benzotriazole ligand formed chelates with metal in a 2:1 (ligand:metal) stochiometry. All the metal(II) complexes were screened for their antibacterial activity against Gram-positive and Gram-negative bacteria. Among the synthesized metal(II) complexes, Cu(II) complex showed the highest antibacterial activity.

Authors: P.S. Desai, R.T. Vashi

DOI: 10.1108/00035591111110714

Volume58
Issue2
Pages70-75
Abstract

PurposeThe purpose of this paper is to investigate the effect that different concentrations of the inhibitor sulphathiazole have on the corrosion of aluminum in 0.01, 0.05 and 0.10 M trichloroacetic acid (TCA), and to elucidate the mechanisms of inhibition for this system.Design/methodology/approachGravimetric measurements and galvanostatic polarization were used to investigate the effect of sulphathiazole on the corrosion of aluminum in TCA solution. The findings were used to determine the corrosion rates and efficiencies of the inhibitor at different concentrations.FindingsThe corrosion rate of aluminum decreased with increasing inhibitor concentrations and the efficiency of inhibition increased with increasing concentration of inhibitor up to almost 89 percent in 0.01 M TCA and up to 65.87 percent in 0.10 M TCA. The concentrations of inhibitor were in the range of 5‐20 mM. Absorption of the inhibitor was onto the aluminum surface and consistent with the Langmuir adsorption isotherm. A plot of log (θ/1−θ) versus log C gave a straight line, which suggests that the inhibitor covers both the anodic and cathodic regions. From the plot of the isotherm, it was observed that one inhibitor molecule occupies more than one active site. The mean ΔGads0 values were negative almost in all cases, indicating that the adsorption was spontaneous and that the mechanism of adsorption was physical – i.e. electrostatic attraction. Polarization data revealed that the inhibitor functions as a mixed inhibitor.Originality/valueThe paper deals with the inhibition of corrosion of 2S commercially pure aluminum in 0.01, 0.05 and 0.10 M solutions of TCA. To date, not much detailed information has been generated about this problem.

No matching articles

Try another word from the title, author or DOI.

Brief Bio

No bio added yet.

Affiliations

Nothing added yet.

Education

Nothing added yet.

Honors & Awards

Nothing added yet.

Society Memberships

Nothing added yet.

Expertise

Nothing added yet.

Specialty

Nothing added yet.

Suggested researchers

EE
Ehab Elsaih
Department of Prosthodontics, College of Dentistry, The Islamic University in Najaf, Najaf, Iraq.
20 publications
HA
Himanshu Aeran
Seema Dental College and Hospital, Rishikesh, Uttarakhand, India
18 publications
CMA(Dr.) Ashok Panigrahi
NMIMS University, Shirpur.
22 publications
Mazyar Yazdani
Oslo University Hospital
34 publications
Taylan Demir
Ankara University, Çankaya University, Bu-Ali Sina University, Epoka University, Lebanese American University, Atılım University, Abant Izzet Baysal University
23 publications
Mgr. Hovsep Kocharyan, Ph.D.
Palacky University Olomouc (Czech Republic)
18 publications
Mohamed Mesregah MD
Menoufia University Faculty of Medicine
79 publications
Wael Amin Nasr El-Din
College of Medicine and Health Sciences, Arabian Gulf University
30 publications
BHARANIDHARAN G
THE NEW COLLEGE, CHENNAI
17 publications
Girendra Kumar Gautam
Shri Ram College of Pharmacy, Muzaffarnagar
63 publications
VY
Varun Yadav
, Indore, Madhya Pradesh, India
15 publications
Dr. N. Karunakaran
Principal and Research Guide in Economics, People Institute of Management Studies (PIMS), Munnad-Post, Chengala (Via), Kasaragod, 671541, Kerala, India, E mail: narankarun@gmail.com https://orcid.org/0000-0002-7213-2841
40 publications

Following

Nobody here yet.

Followers

Nobody here yet.

22 Publications