Aun Haider

Aun Haider

Lecturer

NUST

Profile ID RP-003-8731 Joined 2026-03-05 7 articles
0Connections
4
Total Views
7
Total Publications
215
Publication Views

About me

Lecturer Aun Haider is a qualified professional engineer (EPE) with extensive experience across maintenance, academics, design, and certification in the aerospace sector. He has 06 years of hands-on experience in O-, I-, and D-level maintenance of aircraft, aero-engines, and ground support/servicing equipment. His teaching experience includes two years as a lecturer at CAE, NUST. In industry, he has 02 years of design and development experience in the Turkish Aerospace Industry, Ankara, Türkiye, contributing to the Aircraft Structural Integrity Program (ASIP). He has 02 years of experience in airworthiness certification, working in compliance with the regulatory framework and certification standards. Additionally, he has 02 years of design and development experience with NASTP, engaging in applied research, prototyping, and advanced engineering solutions.

Articles(7)

Authors: Aun Haider

DOI: 10.29019/enfoqueute.1080

Volume15
Issue4
Pages11-18
Abstract

Aircraft operators often modify aircraft configurations, install new equipment, and alter airframes to accommodate this equipment, leading to operations in flight envelopes different from original design profile. These modifications necessitate airframe structural assessments, which typically require comprehensive aircraft design data, often unavailable to operators. This study aims to develop and validate a practical method for finite element analysis (FEA) of aircraft structures in the absence of this detailed design data. Focusing on a case study involving structural analysis of an aircraft wing, this study presents assumptions and idealizations used to develop 2.5D finite element (FE) model of the wing. Fidelity of this model is established by comparing FE analysis results with experimental data. Key validation metrics include reaction forces, load distribution at wing-fuselage attachments, and deformation at reference points on the wing under design load. Comparison between FE analysis and experimental results is carried out to substantiates accuracy of these geometric simplifications and idealizations of load-carrying behaviour of structural members. Therefore, practicality of these idealizations in absence of design data is demonstrated. This study offers a novel approach for structural assessments of aircraft without relying on proprietary design data. The validated method enhances capability of aircraft operators to perform effective structural analyses, thereby extending service life of aircraft with continued airworthiness.

Authors: Aun Haider

DOI: 10.31202/ecjse.1436203

Volume15
Issue4
Pages11-18
Abstract

Finite Element Analysis (FEA) serves as a valuable tool, offering an approximate resolution to partial differential equations, finding extensive utility in structural analysis and design. Intrinsic nature of approximation in FEA underscores the indispensability of meticulous documentation to inspire confidence in the derived outcomes. While comprehensive guidelines for model development abound, there exists a conspicuous absence of a standardized framework explicitly addressing reporting and communication facets of FE studies. Dearth of consistent documentation standards imparts a veneer of opacity to reported FE studies, hindering the requisite transparency essential for objective evaluation. In case, FE analyst remains oblivious to limitations inherent in FE model and simulation platform, reviewers and end-users consequently remain uninformed. Evaluation and refinement of FE models can only be realized when a complete and coherent documentation of simulation studies is at hand. This paper endeavours to present pertinent reporting parameters crucial for a comprehensive understanding and reproducibility of FE studies. Encompassing aspects such as analysis description, model identification, structural modeling, discretization schemes, solver settings, and post-processing details, these reporting parameters aim to furnish a holistic view of simulation process. Furthermore, the manuscript explores realms of sensitivity analysis, verification, and validation (V & V) as indispensable components to fully establish predictive performance of FE models. This paper concludes by advocating for the widespread dissemination of finite element models, affording prospective users the chance to scrutinize and improve upon these models. Illustrated through a case study involving an FE model of a wing rib, the presented reporting parameters establish a foundation for assessing overall quality and scientific rigour of simulation studies. They contribute to the establishment of accountability, reproducibility, and usability in the realm of FEA. Acknowledging dynamic nature of modeling and simulation techniques, these parameters are recognized as subject to evolution. Additionally, it is suggested that any supplementary parameters influencing accuracy of FE models should be duly incorporated for a more nuanced and exhaustive evaluation.

Authors: Aun Haider

DOI: 10.1108/aeat-02-2024-0053

Volume96
Issue5
Pages662-668
Abstract

Purpose This paper aims to comprehensively explore techniques for reducing solution time in finite element analysis (FEA), addressing the critical need for expediting computations to facilitate agile design exploration within project timelines. Design/methodology/approach Drawing from a wide array of literature sources, this paper synthesizes and analyzes various methodologies used to enhance the efficiency of FEA. Techniques are scrutinized in terms of their applicability, effectiveness and potential limitations. Findings The review signifies application of linear assumptions across multiple facets of analysis and delves into matrix order reduction strategies, geometry simplification, symmetry exploitation, submodeling and mesh attribute control. It reveals how these techniques can effectively reduce computational burdens while maintaining acceptable levels of accuracy. Research limitations/implications While this review provides a comprehensive overview of existing efficiency enhancement techniques in FEA, it acknowledges inherent limitations of any synthesis-based study. Future research should focus on refining these methodologies. Practical implications The insights provided in this paper offer practical guidance for structural engineers and researchers seeking to optimize FEA workflows. By implementing these techniques, practitioners can expedite solution times and enhance their ability to explore design alternatives efficiently ultimately leading to cost savings and more robust structures. Originality/value This review contributes to the existing literature by offering a comprehensive synthesis of efficiency enhancement techniques in FEA. By highlighting the originality and value of each discussed methodology, this paper provides a roadmap for future research and practical implementation in the field of structural engineering.

Authors: Aun Haider

DOI: 10.2478/fas-2023-0007

Volume2023
Issue15
Pages115-132
Abstract

Abstract This study addresses the challenge faced by Finite Element Analysts when choosing between free and mapped meshes, especially in terms of convergence stability and solution accuracy. The investigation focuses on 3D solid models under static structural loading, analyzed using Ansys ® and MSC Patran ® . Both free and mapped mesh types, employing equivalent 3D solid elements, are used to assess an aircraft structural component under design load conditions, with fixed boundaries. For free meshes, Tet10 elements in Patran (equivalent to Solid 72 in Ansys) are used, whereas for mapped meshes, CPENTA / CHEXA elements in Patran (equivalent to Wed6 / Hex8 in Ansys) are employed. Mesh convergence studies ensure that discretization does not affect the numerical solution. Notably, a significant stress increase is observed with successive refinement of free meshes, while mapped meshes achieve mesh independence at coarser refinement levels. Comparison of fringe plots indicates the same location for maximum deformation and equivalent stress in both free and mapped mesh models. The findings demonstrate that free meshes tend to underpredict maximum deformation and equivalent stress compared to mapped meshes, with both meshes showing deformation and stress at consistent locations. The findings underscore the importance of carefully choosing the appropriate mesh type, particularly when analyzing critical structural components, to ensure reliability and accuracy in FEA simulations.

Authors: Aun Haider Bhutta

DOI: 10.17163/ings.n32.2024.09

Volume15
Issue32
Pages90-100
Abstract

Modern fighter aircraft are equipped with multiple stations on the fuselage and under the wings to accommodate various external stores, both jettisonable and non-jettisonable. Each configuration undergoes airworthiness certification, including structural analysis of individual stations within the carriage flight envelope. This study focuses on the structural analysis of a fighter aircraft wing station within this specified envelope. To perform this analysis, the wing station is extracted from the comprehensive global wing model, creating a sub-model with equivalent stiffness properties. Utilizing ANSYS Workbench®, Finite Element Analysis (FEA) is conducted for critical load cases to determine the Factor of Safety (FoS). The initial analysis reveals that the wing station has an FoS of 1.2 under the maximum design load. Prestressed modal and buckling analyses indicate a 10% increase in stiffness due to stress-stiffening effects. To further enhance load-carrying capacity, parametric design changes are introduced. Increasing the bolt diameter from 8 mm to 10 mm raises the FoS to 1.33, resulting in an 8% increase in the maximum load-carrying capacity of the wing station. This comprehensive approach, employing FEA, ensures the wing’s structural integrity under static load conditions within the carriage envelope. The study's findings support the wing station's enhanced performance and contribute to safer and more efficient aircraft operations.

Authors: Aun Haider Bhutta

DOI: 10.35453/nedjr-ascn-2023-0016

Volume15
Issue4
Pages47
Abstract

Solar-powered unmanned aerial vehicles (UAVs) with long endurance can be utilised for area surveillance as the regenerative nature of solar energy makes such UAVs a terrestrial satellite with 24/7 endurance. This paper presents an aerodynamic optimisation scheme for UAVs through the selection of airfoils and wing planform during the preliminary design phase. Sizing of the tail and control surface based on historical trends for similar aircraft is also substantiated. Finally, detailed aerodynamic and stability analyses of the optimised configuration validate adequate flying and handling qualities of UAVs. The optimisation effort increased the endurance factor by 19.75 percent. This increase will conserve the energy required to overcome in-flight drag and surplus power that can be utilised by onboard equipment.

Authors: Aun Haider Bhutta

DOI: 10.35453/nedjr-stmech-2021-0001

Volume15
Issue3
Pages115-132
Abstract

The wing of a fighter aircraft has various structural members which support aerodynamic and inertial loads, and transmit these loads to the fuselage. As a foremost step to evaluate the structural behaviour of the wing assembly, component contribution analysis is carried out. A finite element analysis of wing tulip of fighter aircraft isolated from the wing was performed under the design load case. Since aircraft wing is a statically indeterminate structure, reaction forces and moments at the supports depend upon the stiffness characteristics of the wing itself. In addition, stiffness of wing also affects the distribution of load and resulting deformation of the wing. These require that support structure of tulip isolated from the global wing model is represented by appropriate boundary conditions for the analysis. A comparative study for three boundary conditions (fixed support, nodal displacements and elastic support) was carried out to determine the representative boundary condition for the analysis of structural members isolated from the global model. It was found that elastic support represents the stiffness of the global model and is a more appropriate boundary condition for the analysis of local models which are isolated from a global model.

No matching articles

Try another word from the title, author or DOI.

Brief Bio

Lecturer Aun Haider is a qualified professional engineer (EPE) with extensive experience across maintenance, academics, design, and certification in the aerospace sector. He has 06 years of hands-on experience in O-, I-, and D-level maintenance of aircraft, aero-engines, and ground support/servicing equipment. His teaching experience includes two years as a lecturer at CAE, NUST. In industry, he has 02 years of design and development experience in the Turkish Aerospace Industry, Ankara, Türkiye, contributing to the Aircraft Structural Integrity Program (ASIP). He has 02 years of experience in airworthiness certification, working in compliance with the regulatory framework and certification standards. Additionally, he has 02 years of design and development experience with NASTP, engaging in applied research, prototyping, and advanced engineering solutions.

Affiliations

Nothing added yet.

Education

Nothing added yet.

Honors & Awards

Nothing added yet.

Society Memberships

Nothing added yet.

Expertise

Nothing added yet.

Specialty

Nothing added yet.

Scholars in the same field

CM
Carol Mary Koshy
0 publications
AS
ankit Singh singh
0 publications
RS
Ritvik Sharma
0 publications
NK
Nithis Kumar S
0 publications
SJ
Dr Shreya jain
0 publications
AK
Dr Anil Kumar Dwivedi
Veer Chandra Singh Garhwali Government Institute of Medical Science and Research, Srinagar Garhwal Uttarakhand, India
0 publications
HP
Himanshu Pandey
0 publications
AR
Ananta Raj Sharma
0 publications
KK
KARAMVIR KARAMVIR
0 publications

Following

Nobody here yet.

Followers

Nobody here yet.